Aukey EP-B80 Manual Del Usuario página 6

Pairing
Starting with the earbuds powered off:
1. Press and hold the multi-function button until the LED indicator flashes
green and white alternately
2. Turn on Bluetooth on the device you want to pair with the earbuds
3. In the list of available devices, find and select "AUKEY EP-B80"
4. If a code or PIN is required for pairing, enter "0000"
Notes
● To clear the pairing list, power on the earbuds and then hold volume +
and volume - simultaneously for 5 seconds until the LED indicator lights
up green and white. Once the pairing list is cleared, you'll hear a tone
and the earbuds will automatically enter pairing mode
● The earbuds will automatically shut down after 5 minutes in pairing
mode if no devices are paired
● If your paired device is turned off or manually disconnected, the
earbuds LED indicator will flash white twice every 5 seconds and the
earbuds will shut down after 5 minutes
● Double-press the multi-function button after turning off Bluetooth on a
connected device to enter pairing mode. The LED indicator will flash
white and green alternately for 3 minutes. If no devices are paired,
the earbuds will enter standby mode
● The maximum wireless operating range is 15m (49ft). If you exceed this
range, the earbuds will disconnect from your paired device and you'll
hear a tone. The connection will be re-established once you re-enter
the wireless range within 5 minutes. The earbuds will automatically
reconnect to the last-paired device. To connect with other devices,
repeat the previous "Pairing" steps
- 04 -