ANCHORING
Proper anchoring is essential to the safety and performance of aquapark products. 50-50
Log does not require anchoring, but it must always be connected to an Aquaglide main
feature item that is properly anchored.
Open Water: (General guidelines - not intended to replace need for professional installation)
1. Place product in an area protected from wind and boat traffic. Confirm allowances for
stated minimum water depth, safe distance away from hard objects and vertical clearance
requirements.
2. Consider prevailing conditions such as wind, waves and other environmental factors in
positioning this item. 50-50 Log is best positioned away from a breeze, not across or facing
a breeze. Check water and seabed for sharp or dangerous objects.
3. Keep product a safe distance from docks, boats, boat lifts, and any other structures. To
prevent potential damage to product, injury or death, NEVER tie the product to a dock.
4. 50-50 Log does not require anchoring, however, some users may wish to anchor this
item to prevent excessive movement in strong winds. Optional anchoring recommendations
below.
Anchor Details - 50-50 Log
Anchor rings on product
Recommended anchor qty
2-Way Bridle?
Recommended weight/ anchor
Recommended total anchor weight
Commercial Pool:
1. Product placement in commercial pool should be checked carefully in advance to confirm
allowances for the stated minimum water depth, safe distance away from hard objects
(pool edge) and vertical clearance requirements. Most residential pools cannot meet these
requirements.
2. Pool moorings typically use a minimum of 4 horizontal mooring lines made from heavy
duty elastic. Additional horizontal moorings should be added to increase stability and as
necessary for larger product groups.
3. Horizontal Moorings are usually attached to pool anchor eyes, such as those used to
secure lane buoy lines. Adjust mooring lines to keep product(s) under tension at all times.
8
ANCHORING
Qty/ Weight lb (kg)
1
1 (optional)
None
220lb (100 kg)
220lb (100 kg)
www.aquaglide.com