Outside Dimension Drawing - Sharp AN-52AG4 Manual De Manejo

Please strictly observe the following.
Special skill is required to install the LCD color
TV, so please have it installed by a contractor
specializing in such installation. The customer
should not attempt to install the TV. Sharp shall
not be responsible for improper installation or
any accidents, damage, or injury resulting from
improper installation.

Outside Dimension Drawing

Based bracket A
(Plate thickness 2 mm)
520
E-2
Based bracket B
(Plate thickness 2 mm)
10.5
External view of assembled bracket
The mark denotes screw holes (20 holes) where the bracket is held in
place using off-the-shelf screws (6 mm dia.).
* These are the dimensions for when the wall-mount bracket is set at an angle
of 20 .
To the contractor
• To ensure the safety of the customer, conduct the
design so that the strength of the installation
location is sufficiently strong to support the weight
of the LCD color TV and the wall-mount bracket.
• Be sure to use two or more people to conduct the
work.
• The wall installation screws for the wall-mount
brackets are not included with the fixtures. Select
off-the-shelf screws that match the wall.
77.4
69.4
Wall-mount bracket (Left/Right)
(Plate thickness 2 mm)
64.5
48
82.5
Fixture: Approx. 7.9kg
Unit: mm