Mx Onda MX-PI2624 Manual De Usuario E Instalacion página 59

2. Place a suitable container for the chosen cooking
zone.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touch the decrease or increase buttons 1, 5 or 6 (- or
+) corresponding to the cooking zone you want to
turn on and choose the desired power level.
When turning on a cooking zone, the default
power level is 5.
If the display flashes the indication
This means that...
You have not placed a pan on the correct cooking zone or,
that the cookware you are using is not suitable for induction cooking or,
that the pan has a too small base or is not centered correctly on the
cooking zone.
Therefore...
Heating is not carried out unless there is a suitable container in the cooking
zone.
The screen will turn off automatically after 2 minutes if a suitable container
is not placed on it.
When you have finished cooking
1. You must use the decrease or increase buttons 1, 5
or 6 (- or +) corresponding to the cooking zone you
want to turn off.
2. Using the decrease button ( - ) of the selected cooking zone, select the
power level " 0 ". If the display shows " H " it means that the cooking zone is
very hot.
11