Control Panel Functions - Lorell LLR33558 Manual Del Propietário

Calefactor de cerámica con termostato
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION INSTRUCTIONS
Important!
Your heater is equipped with a polarized
alternating current line plug (a plug having
one blade wider than the other). This plug
will fit into the power outlet only one way.
This is a safety feature. lf you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug should still
fail to fit, contact your electrician to replace
your outlet. DO NOT defeat the safety
purpose of the polarized plug.

Control Panel Functions

A
Power and Setting Control
B
Power Indicator Light
C
Thermostat Control
Place the heater on a firm level surface that is free of obstructions, and
at least 3' (0.9m) away from all walls and other objects such as furniture,
curtains, plants or combustible material.
With the Power and Setting Control "A" in the "OFF" position, plug the
heater into a grounded 120V outlet.
Turn the heater "ON" by turning the Power and Setting Control "A"
clockwise to the desired power setting (LO, HI, LO& OSC or HI & OSC).
The Power Indicator Light "B" will illuminate. The power settings operate as
follows:
LO: The Fan and heating elements operate at Lo setting.
HI: The Fan and heating elements operate at 1500 W.
LO&OSC: The Fan and heating elements operate at Low setting with
oscillation.
HI&OSC: The Fan and heating elements operate at 1500 W with oscillation.
Turn the Thermostat Control "C" to the desired setting between "MIN" and
"MAX".
Caution:
This heater includes a Thermal Cut-Off Overheat Protection System that
shuts the heater off if it overheats due to abnormal conditions. If this occurs, turn
the heater "OFF", unplug it, and inspect and remove any objects on or adjacent
to the heater. AIIow it to cool for a few minutes, plug it back in, and resume normal
operation.
C
3
B
A

Publicidad

Tabla de contenido
loading

Tabla de contenido