Connecting Bluetooth - Onkyo DP-S1A Manual De Instrucciones

> Before Start > Part Names

Connecting BLUETOOTH

1
Library
Online
Line
Balanced
Out
You can listen to music wirelessly by using
BLUETOOTH wireless technology enabled
devices such as headphones or speakers.
Reception is possible over a distance of 10
m with a clear line of sight. The
communication distance will be reduced in
some conditions. This unit supports
® TM
Qualcomm aptX HD. You can enjoy
higher quality wireless sound by
connecting headphones and wireless
speakers that support aptX HD.
0 Playback will be aptX when connected
with a Bluetooth enabled device that
supports aptX, and aptX HD when
connected with a Bluetooth enabled
device that supports aptX HD.
Pairing for play
Pairing is necessary when connecting the
BLUETOOTH wireless technology enabled
devices for the first time. Make sure the
BLUETOOTH wireless technology enabled
device you want to connect is ready to be
detected.
1. Tap " " in the home screen.
18
> Initial Setup
®
2
Settings
Wi-Fi
Bluetooth
Brightness
Balanced Output Select
Line Out Mode
2. Tap "Bluetooth".
3. Turn on the BLUETOOTH feature and
select the device to connect from the
"Available Devices" list.
4. Pairing will end after a short time.
5. Tap "Library" or "Online" in the home
screen.
0 This unit can store the data of up to eight
paired devices.
When connecting after the first time
1. Tap " " in the home screen.
2. Tap "Bluetooth" and tap the device you
want to connect in "Paired Devices".
Canceling a connection
1. Tap " " in the home screen.
2. Tap "Bluetooth".
3. Tap " " at the top right of the device
you want to disconnect, then tap
"Disconnect".
0 Pairing information is not deleted even if
you cancel the connection. Tap "Forget
this device" to delete the pairing
> Playback
3
Bluetooth
Bluetooth
Paired Devices :
Not Paired
Available Devices :
Device 1
information.
Advanced Setup | Supplementary Information | Others