6.
Installation Clearances
Install in accordance with relevant building and mechanical codes, as well as any local, state or
Item
from both combustible and
either side of the unit to facilitate inspection.
front of the unit to facilitate maintenance
and service if necessary.
above and below the vent pipe to facilitate
inspection and repair if necessary.
<When using indoor air for combustion>
has the possibility of generating steam
that contains fats or oils, use a *dividing
plate or other measure to ensure that the
unit is not exposed to air containing such
impurities.
* The dividing plate should be of
noncombustible material of a width
greater than the water heater.
WARNING
or more
Exhaust hood
Dividing plate
Illustration
or more
or more
or more
Distance from
the side
or more
or more
Water
heater
Range