2.4.4.1.3. Turn Off delay (T-off)
The deactivation of the switching output is delayed until after to the time of removal of the target in the front
of the sensor, as like shown in the figure below.
Presence of
Presence of target
target
N.O.
2.4.4.1.4. Turn ON and Turn Off delay (T-on and T-off)
When selected, both the Ton and the Toff delays are applied to the generation of the switching output.
Presence of target
N.O.
2.4.4.1.5. One shot leading edge
Each time a target is detected in front of the sensor the switching output generates a pulse of constant
length on the leading edge of the detection. This function is not retriggerable. See figure below.
Presence of target
N.O.
16
Rev.00 - 06.2021 | MAN PD30ETB IO-Link EN | © 2021 | CARLO GAVAZZI Industr6
Toff
Toff
Ton
Ton
∆t
∆t
Toff
Toff
Example with normally open output
Ton
Toff
Toff
Example with normally open output
∆t
∆t
Example with normally open output