TRENDnet TEW-P21G Guía De Instalación Rápida página 10

Q7. I pressed the reset button and held it for 15 seconds. I also typed in
http://192.168.0.1 in a web browser, but I still cannot access my print server.
A7.
Make sure to change your IP Address to 192.168.0.xxx where xxx is an
available number between 2 to 254.
Q8. I configured my Wireless Print Server to have the same SSID as my Access
Point, but I still cannot print from my Wireless Print Server.
A8.
Your Access Point or Wireless Router may have enabled its wireless security.
You can either disable wireless security or configure the Print Server's
wireless security feature. Make sure that the encryption method and
password for your Wireless Printer is the SAME as your Access Point or
Wireless Router. Also make sure that the format (HEX or ASCII) and the bit
encryption (64-bit, 128bit, etc.) is the same.
If you have any questions regarding the TEW-P21G, please contact TRENDnet
Technical Support Department.
8