Mark MBAR 612 BAT WI Manual De Uso página 12

EN
6.8 Battery output setting
1) Press the【ENTER】button in 【BAT】menu, then enter to the Battery output setting.
2) Press the 【UP/DOWN】button to select【HIGH】,【MIDDLE 】, 【LOW】
3) Press the 【ENTER】button to escape and save.
6.9 DMX signal selection setting
1) Press the【ENTER】button in 【SIGN】menu, then enter to the DMX signal selection setting
.
2) Press the【UP/DOWN】button to select【2.4G 】,【CABLE】
3) Press the【ENTER】button to escape and save.
6.10 Wireless set
1) Press the 【ENTER】button in 【WIRE】menu, then enter to the wireless set
.
2)【RESET 】
3)【KEY】
6.11 CUSTOM COLOR SETTING
1) Press the 【ENTER】 button in 【CTST】 men u, then enter to the custom color setting.
2) Press the 【UP/DOWN】 select 【CT01】...【CT10】
3) Press the 【UP/DOWN】button to select 【1-512】numerical value.
4) Press the 【ENTER】button to escape and save.
6.12 AUTO RUN, SELF-PROGRAM RUN
1)Press the 【ENTER】button in 【AUTO】menu, then enter to the auto run,self-program run.
2)Press the 【UP/DOWN】button to select 【AT01】...【AT05】，【SPEED 】，【CHASE01 】...【CHASE03
】
3)Press the 【ENTER】button to start running.
6.13 EDIT SELF-PROGRAM
1) Press the【ENTER】button in 【PROG 】menu, then enter to the edit self -program.
2) Press the【UP/DOWN】button to select 【CHASE01 】...【CHASE03 】
3) Press the【ENTER】button for confirmation and enter to the next menu.
4) Press the【UP/DOWN】button to select 【SCENE01 】 ...【SCENE20 】
5) Press the【ENTER】button for confirmation and enter to the next menu.
MBAR 612 BAT WI - 11 -
User Manual/Manual de Uso