Mark MBAR 612 BAT WI Manual De Uso página 14

EN
2) Press the 【UP/DOWN】button to select 【 YES】.
3) Press the 【ENTER】button to confirm sending.
Illustrations ：
1)Please disconnect the connection of projector and DMX console before sending the parameter.
2)The information of【ADDR】、【CAL】can't be sent, can't be downloaded each other.
3)There will be an automatic reset of the other projectors after receiving parameter correctly.
7. Instruction for DMX wireless module
1) There are 4 modes:
mode(blue indicator), normal mode(yellow indicator),custom mode(red indicator)
After 【RESET 】 ，and then press 【KEY】 to switch above modes, select needed mode and press 【 KEY】 one
2)
second to confirm and save it.
Under receive mode, press 【KEY】 3 seconds to delete matching between light and transmitter.
3)
Under transmit mode, press 【KEY】to match receive mode, press 3 seconds will delete matched mode.
4)
5) Working in normal mode, indicator has 7 colors for option, when light and transmitter indicator are in the
same color, can receive and transmit data.
6) User - defined function is not available.
7) Notice: The transmit function is not available here.
Receive mode(green indicator),
MBAR 612 BAT WI
transmit
- 13 -
User Manual/Manual de Uso