Commissioning; Troubleshooting - REV JY-249 Instrucciones De Instalacion Y Uso

Commissioning

!
Connect the mains power unit with the monitor (12V
800mA).
!
Finally plug in the connector of the power unit into the 230V
socket. The monitor can also be operated with batteries (10 x
(11)
type "C") .
!
Switch on the monitor with the operation switch (4). The
status display lights.
!
Set the channel on both the monitor and camera - see
Settings.
!
Take away the battery or the power supply unit if you don´t
use the device over a long time.

Troubleshooting

With this radio-video monitoring system, you have acquired a
product manufactured according to the state-of-the-art
technology and is therefore safe for operation. Nonetheless,
problems or disturbances can still arise. Therefore, we now
want to explain how you can easily eliminate possible
disturbances on your own.
Error
Possible cause
• Radio camera or monitor has no power
No image
supply. The status display LED is not
lighted, possibly the power unit is not
properly plugged into the socket or the
batteries are discharged (status display is
lighted in orange).
• The distance between the radio camera
and receiver is too large.
• The channels set on the radio camera and
transmitter are not the same.
21