peerless-AV SA771P Instalación Y Montaje página 7

• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the screen.
• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten M10 x 15mm
screws (E) to 40 in. • lb (4.52 N.M.) maximum torque.
Mounting Flat Panel Screen
NOTE: Refer to PLP model instruction sheet for attachment of dedicated PLP plate to screen.
4
Install two M10 x 15mm screws (provided with dedicated PLP plate) into top two holes of dedicated PLP plate
leaving 1/4" of exposed thread as shown in fi gure 4.1.
4-1
Insert two M10 x 15mm screws (E) into bottom holes of adapter plate as shown in fi gure 4.2. Tighten all fasteners
with 6mm allen wrench (H).
DEDICATED
PLP PLATE
ADAPTER PLATE
DEDICATED PLP PLATE
ADAPTER PLATE
WARNING
M10 X 15MM
SCREW
fi g. 4.1
fi g. 4.2
7 of 32
1/4"
A
E
ISSUED: 03-31-10 SHEET #: 095-9347-6 03-22-12