ABC Design Risus Isofix Base Instrucciones De Uso página 9

- Isofix Base
- compatible with ABC Design "Risus" child seat (Group 0+)
- Weight: 6,8 kg
- Tested for conformity with ECE R44/04
Care instructions
- CAUTION: Take the base out of the car for cleaning.
- Wipe the plastic parts down with a cloth soaked in warm soapy water.
- Do not use abrasive cleaning agents.
- CAUTION: Never use scouring agents - not even on movable parts of the Base.
Safety instructions
Read these instructions carefully before use and keep them for future reference. Failure to read these instruc-
tions may compromise the safety of your child.
NB:
- The safety of the child seat is only guaranteed by the manufacturer when it is used by the initial purchaser.
It is therefore not advisable to buy a second-hand seat.
- The child seat is no longer fit for use five years after purchase. It is possible, under certain circumstances,
for the quality of the seat to be imperceptibly affected if subject to very frequent usage.
CAUTION:
- Never leave your child alone in the child seat / in the vehicle.
- The child seat may not be used on car seats with airbags. Disable the air-
bag if necessary (consult your car dealer).
- The child seat is only for use in car seats which face the direction of travel.
- The child seat must always face against the direction of travel - not in the
direction of travel.
- The child seat may only be used on car seats with Isofix anchor points
(between seat and backrest). Please comply with the regulations in force in
your country.
- Do not place any objects in the footwell in front of the Isofix adapter in the
interests of your baby's safety.
- An unsecured child seat may injure the passengers in the event of an
emergency stop or an accident.
- Ensure that all items of luggage and objects which could injure passengers
in the event of an accident or a sudden application of the brakes are adequa-
tely secured.
- Do not make any modifications to the child seat. This could adversely affect
the safety of the seat.
- Please read these instructions for use carefully and follow the installation
instructions meticulously in the interests of your child's safety.
- When not in use, the child seat should not be left in the blazing sun, the
residual heat from which might later cause unnecessary discomfort to your
baby.
- The seat may sustain damage in an accident (even at low speed). Send
the child seat to us accompanied by an official accident report. We will then
check your child seat and replace it if necessary.
- Check all the main parts regularly for signs of damage. Make sure that the
mechanical parts are in perfect working order.
- Make sure that the child seat does not get caught in the door of the vehicle
or damaged by rotating car seats or by objects placed on the child seat (e.g.
luggage), etc.
- Always arrange for us to inspect your child seat if it gets damaged (e.g.
after being dropped).
EN - 04