Assembling Your Smoothie Splash - Back to Basics SMOOTHIE SPLASH Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before assembling your Smoothie Splash
base in warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the
valve for cleaning (see Cleaning Your Smoothie Splash
life of your smoothie maker, do not wash parts in the dishwasher.
1.
Position the rubber gasket down onto the circular flat surface in the blade base.
2.
Screw the blade base on the bottom of the blending jar by twisting the blade
base counter-clockwise until tightened. Make sure that the blade base is tightly
fastened to the blending jar and that the rubber gasket is properly compressed
between the blending jar and the blade base.
3.
Lock the lid onto the top of the blending jar. Lock the clear lid cap in the center
of the lid or place the stir stick through the center of the lid if blending liquids or
frozen drinks.
4.
Place the blending jar onto the motor base so the bottom of the blade base is
sitting flat on the motor base.
5.
Plug in the cord. Your smoothie maker is now ready to use.
Lid Cap
Lid
Blending Jar
Dispensing Valve
A
SSEMBLING
Y
S
OUR
MOOTHIE
wash all parts, except for the motor
4
S
PLASH
section). To prolong the
Stir Stick
Rubber Gasket
Blade Base
Motor Base

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido