Power Button
To turn on the massage
functions, press the
POWER button. The
Targeted
L.E.D. indicator above it
Massage Zones
will illuminate and
Zone buttons activate
confirm your selection.
motors to massage
To turn the massage
specific areas:
functions off, simply
shoulders, upper back,
press the button again
middle back, lower
and the L.E.D. indicator
back, and thighs.
will turn off.
Customize your
massage by choosing
one specific area, any
combination of areas or
Power Adapters
all five at once. To
This product is powered
select a massage area,
by a custom 120 volt
simply push the button
AC home adaptor, and
and the corresponding
12 volt DC auto adaptor
L.E.D. light will
(cigarette lighter plug-in
illuminate. To deselect,
style). Both are included
simply push the button
with your unit.
again and the
corresponding L.E.D.
lights will turn off.
NOTE: When selecting the heat feature
with massaging action, there will be a
slight decrease in the strength of the
massage output. This adjustment is
perfectly normal and should not be
interpreted as a defect.
6
Heat
Soothing heat is activated by pushing the heat
button. To turn heat off, simply push the
button again. A glowing L.E.D. light indicates
that heat is on.
NOTE: For safety purposes heat will only
function when massage is activated.
Massage Speed
Choose the speed at which your custom
programmed massage travels in the Pulse,
Side to Side and Mix programs. There are 3
options: low (L), medium (M) and high (H)
and corresponding L.E.D. lights will indicate
your selection. The default setting is medium.
To change the speed of your massage simply
press the button.
Massage Strength
Choose the intensity of your massage with
three options of massage strengths: low (L),
medium (M), and high (H). L.E.D. lights
correspond to your selection. The default
setting is medium. To change the strength of
your massage, simply press the button again.
Massage Functions
This product incorporates 4 pre-programmed
massage functions that can be easily selected
by pressing the corresponding button. Once
activated, you can move from one function to
another by simply pressing another function key.
All Motor Massage
Activates all 10 motors for a total massage
experience. This is the default setting when
the unit is powered on.
Pulse Massage
Repeating pulses of massage relief
Side-to-Side Massage
From your left side to your right, back and forth
Mix Massage
An invigorating mix of the other programs
10 Massage Motors
Heat
7