Basic Operations; Turn On/Off The Power; Mute; Adjust The Volume - Better BT5000 Manual De Operaciones

2-din dvd multimedia con navegacion/bluetooth
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Operations

Turn on/off the power

1. Press [ VOL ] knob to turn on the unit.
The unit will go back to the last source
used prior to the radio being powered off.
2. When on, long press [ VOL ] knob to turn
off the unit.

Mute

Press [ VOL ] knob to mute the sound.
Note:
• P ressing [ VOL ] knob again or adjusting
volume will release muting.

Adjust the volume

Rotate [ VOL ] knob to increase or decrease
the volume level.
The adjustable range of volume is 0 to 50.

Playing source selection

1. Press [
] button on the panel to show
main source menu.
2. Touch desired icon on the bottom of the
screen to enter corresponding working
mode, such as Disc, Navi, Radio, etc.
Drag left/right to scroll.
When Vehicle is Put in
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.

When parking brake applied

1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving forward, and a
video source is being played, the screen
will display a warning disclaimer and a
blank screen. The warning screen will
prevent the driver from watching images.

Wallpaper

1. Long press the blank area of the main
menu.
2. Select a source from:
[Gallery]: to visit the gallery of mobile
storage.
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Wallpapers]: to show the wallpapers
stored in the unit. Drag left/right to scroll.
3. Select desired picture to view, touch [Set
wallpaper] or [OK] to confirm selection.
EN - 6

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido