Operating Your Appliance; Temperature Control - Avanti FFBM92H0W Manual De Instrucciones


Temperature Control Panels
Refrigerator Temperature Control

Setting the Temperature Control
•
Your refrigerator has one control for regulating the temperature. The temperature control is located
on the middle of the refrigerator compartment. As well as a damper control for the freezer to
balance the cold air distribution between the two compartments.
•
The temperature control in the refrigerator compartment will control the actual cooling cycle
whereas the control knob in the freezer compartment will adjust the distribution of the cold air
between the freezer and the refrigerator compartments.
•
The first time you turn the unit on, adjust the temperature control knob to "4 ON THE LEFT SIDE"
Freezer Temperature control and "MAX" on the Refrigerator Temperature Control and run for at
least 4 hours before placing foods inside. This will ensure the freezer cabinet is thoroughly chilled
and the refrigerator compartment will be stabilized before food is placed. Then return selector to
"MIDDLE" or "RECOMMENDED" position in the freezer compartment and "MIDDLE" in the
refrigerator compartment.
•
Adjust the temperature control to the setting that best suits your needs. The setting of "MED" in the
refrigerator compartment and "MIDDLE" or "RECOMMENDED" in the freezer compartment will
distribute the cold air equally between both compartments which should be appropriate for home or
office refrigerator use.
•
If you at any time want to distribute a larger amount of cold air to the freezer for example is a large
amount of food has been added to the freezer, simply move the controller to the "4 ON THE LEFT "
position until the desired temperature has been attained then return the controller to the "MIDDLE"
or "RECOMMENDED" position.
•
If you at any time want to distribute a larger amount of cold air to the refrigerator section, for
example to quickly cool down if a large amount of fresh food has been added, simply move the
controller in the freezer to the "4 ON THE RIGHT" position until the desired temperature has been
attained and then return the controller to the "MIDDLE" or "RECOMMENDED" position.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR
WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE
110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER
TEMPERATURES INSIDE THE REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º
SET THE FREEZER TEMPERATURE CONTROL TO THE "COLDEST" SETTING.

OPERATING YOUR APPLIANCE

Freezer Temperature Control
9