Saving Settings - Crest Audio Pro-LITE 2.0 Manual Del Propietário

Limiter
The Pro-LITE DSP has limiters available on each channel. These
limit the signal level to the input of the power amplifier stage.
The limit threshold starts at zero and is adjusted in -1 dB steps,
reducing the maximum output. You must be aware that the
Pro-LITE DSP works the same as most other amplifiers in that
their maximum output depends on the line voltage and load
impedance. Depending on load, you may need to reduce the
limiter up to 3 dB before the output is reduced.
Memory
The Pro-LITE has four memory locations where its settings can be stored and then recalled. Each location has a six-character name
to identify the file. The name of the active preset is also displayed in the Main Menu "Memory" screen.

Saving Settings

In the Memory Operation Sub Menu, select "Save Settings."
Select one of the four preset locations.
Edit the name by rotating the cursor to select the character
and pressing the encoder to step to the next position. Continue
until complete. To keep the same name, press the encoder six
times to step through the name edit screen.
Once the save location has been selected and you have
named the preset, you will be given a yes/no option to
complete the save.
Recalling a Preset
In the Memory Operation Sub Menu, select "Save Settings."
Select one of the four preset locations.
Edit the name by rotating the cursor to select the character
and pressing the encoder to step to the next position.
Continue until complete. To keep the same name, press the
encoder six times to step through the name edit screen.
Once the save location has been selected and you have
named the preset, you will be given a yes/no option to
complete the save.
Lock
The security lock feature of the Pro-LITE allows selected controls to be locked to prevent unauthorized adjustment. A four-digit
password must be set when the lock is engaged. This password must be entered whenever a Sub Menu is entered to allow
temporary access to the edit functions. The lock is re-engaged whenever you return the Main Menu or turn the unit off. All editing
is locked when the power is off.
Note: Be sure to make note of the password. Contact customer service if the password is lost or misplaced.
The Pro-LITE amplifiers have three different lock modes:
Off All settings can be adjusted without entering a password.
All Except Volume A password must be entered for all edit Sub Menus except volume.
All with Volume A password must be entered for all edit Sub Menus including volume.
Limiter screen
Save Settings screen
Recall Preset screen
32