LD Systems LD WS1G8 Manual De Usuario página 14

SYSTEM SETTINGS:
ASC (frequency synchronisation via infrared)
The transmission frequency of a wireless system has to be the same in both transmitter and receiver.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
Push the ASC button on the receiver (the ASC symbol in the display blinks) and hold the (switched on) trans-
1
mitter with its infrared interface facing direct to the infrared interface of the receiver in a distance between
2
5 and 20 cm. After a short moment the synchronisation process is done and the RF signal level meter of the
3
receiver indicates a signal.
1
2
2
3
LOw BATT (low batteries)
If the „LOW BATT" indicator blinks in the receiver display, the batteries in the transmitter must be replaced immediately..
14