Troubleshooting - LD Systems LD WS1G8 Manual De Usuario

PROBLEM DISPLAY
No sound or volume Transmitter: Display is turned
too low. off.
Receiver: Display is turned off.
Receiver: RF indicator is off.
Transmitter: Power is turned
on.
Receiver: RF indicator is
illuminated.
Bodypack transmitter: Display
is turned on, Mute LED lights
up.
Receiver: RF indicator is
illuminated.
Distortion or unwanted Receiver: RF indicator is
noise. illuminated.
Distorted sound. Transmitter: Battery symbol
blinks.
Receiver: AF level meter too
high.
TROUBLE SHOOTING:
SOLUTION
Make certain that transmitter is turned on.
Make sure that batteries are ok.
Check power connection.
Turn power on.
Check up that transmitter and receiver are set to
the same frequency.
Reduce distance between transmitter and receiver.
Attend that transmitter and receiver are in direct
line-of-sight.
Make certain that antennas of receiver are con-
nected and positioned upwards in V-shape.
Deactivate mute function.
Increase volume of receiver.
Increase gain of transmitter.
Check audio connection of receiver and mixing
board.
Check mixing board settings.
Remove possible reasons of interference (digitally
controlled units, other wireless systems in same
location).
Set wireless system to different transmission
frequency.
Replace batteries
Reduce gain of transmitter.
15