Palmako ELD16-1819 Manual De Instrucciones página 8

Installation manual - English
➢ The house must be anchored to the base surface! It is not allowed to use a house that is not anchored!
You must select the anchors (not included in the supplied kit) and the appropriate method of attachment
depending on the base surface (see installation manual)!
➢ It is not allowed to use ground anchors (no concrete poured) with anchor bolts by attachment to
pavement slabs!
The house can be installed on either a soft (for instance: lawn) or hard (for instance: pavement slabs) surface.
A. Soft surface installation
When installing the house on a soft surface, use concrete forks (4 pcs), Art. 73530 (manufactured from
structural steel S235 and reinforced steel DIN488,BST500).
NB! The concrete forks are not included in the supplied kit!
Dig a hole for each support (consult with a local construction company), fill it with concrete and place the
concrete forks in the precisely measured spots. Make sure that all the concrete forks are situated at the same
height! Allow sufficient time for the concrete to harden. After that put the house on the forks and attach with
bolts.