Cd / Usb / Ipod - Kenwood KDC-X598 Manual De Instrucciones

CD / USB / iPod

Start playback
The source changes automatically and
playback starts.
CD
M Eject disc
Label side
USB
USB input terminal
CA-U1EX (max.: 500 mA)
(optional accessory)
iPod/iPhone
USB input terminal
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone * 1
Press 5 iPod to select the control mode
while in iPod source.
MODE ON: From the iPod * 2
.
MODE OFF: From the unit.
6
To Do this
Pause or resume Press 6 IW (or press ENT IW on RC-406).
playback
Press S / T (or press S / T (+) on RC-406).
Select a track/file
Select a folder * 3
Press J / K (or press
Reverse/ Press and hold S / T (or press and hold S / T (+) on RC-406).
Fast-forward
Repeat play * 4
Press 4
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file
( 18): FILE REPEAT, REPEAT OFF
Random play * 4
Press 3
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
Press and hold 3
*
1 Do not leave the cable inside the car when not using.
* 2
You can still play/pause, file skip, fast-forward or reverse files from the unit.
* 3
Only for MP3/WMA/WAV files. This does not work for iPod.
*
4 For iPod: Applicable only when [MODE OFF] is selected.
* 5
For CD: Only for MP3/WMA files.
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn Radio,
TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
AM– / #FM+ on RC-406).
*
repeatedly.
repeatedly.
to select "ALL RANDOM". * 5