Maintenance Schedule; Maintenance - Craftsman 917.20384 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE SCHEDULE

Check Brake Operation
Check Tire Pressure
Check Operator Presence and ROS Systems
T
Check for Loose Fasteners
R
Check/Replace Mower Blades
A
C
Lubrication Chart
T
Check Battery Level
O
Clean Battery and Terminals
R
Clean Debris off Steering Plate
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level
Change Engine Oil (models with oil filter)
Change Engine Oil (models without oil filter)
E
Clean Air Filter
N
Clean Air Screen
G
Inspect Muffler/Spark Arrester
I
Replace Oil Filter (If equipped)
N
Clean Engine Cooling Fins
E
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must main tain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter assure
proper air-fuel mixture and help your en-
gine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.

MAINTENANCE

BEFORE
EVERY
EACH
8
USE
HOURS
4 - Not required if equipped with maintenance-free battery
5 - See Cleaning in Maintenance Section.
Zerk
Front
Wheel
Bearing
Zerk
Steering
Sector
General Purpose Grease
Refer to Maintenance "ENGINE" Section.
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lu bri cants will attract dust and dirt
that will short en the life of the self-lu bri cat ing
bearings. If you feel they must be lu bri cat ed,
use only a dry, pow dered graphite type
lu bri cant sparingly.
17
EVERY
EVERY
25
50
HOURS
HOURS
HOURS
3
4
5
1,2
1,2
2
2
6
6 - Inspect the muffler every 50 hours of operation
LUBRICATION CHART
Steering Pivot Bolts
Spindle
Gear
Teeth
EVERY
EVERY
BEFORE
100
SEASON
STORAGE
1
2
,
2
2
or six months for signs of damage. If damage is
found, refer to the repair parts list or contact your
local dealer to order a replacement.
Spindle
Zerk
Front
Wheel
Bearing
Zerk
Engine

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido