Bresser 18-77300 Instrucciones De Uso página 17

Taking a fi lm
The fi lm recording is started by pressing the recording knob; pressing
this same button again to stop the recording. During fi lm recording, the
record symbol fl ashes on the top of the display next to the fi lm camera
symbol and the running recording time is displayed above likewise.
The resolution of the fi lm images is 640 x 480 pixels.
d e F c
1. Battery charge
2. SD card status
3. Video mode
4. Recording status
5. Recording time
b
Connection to a computer
ATTENTION! Never disconnect an existing data connection to the
computer before you transfer all the data. An interruption can lead to data
loss. The Mini USB connection enables you to connect the night vision
device to a computer via a mini-USB cable *, allowing you to transfer
images or videos on this or to view them as an enlarged image/video
on the screen. The computer recognizes the night vision device as an
external storage device normally and allows access to the data of the
inserted SD card *. As long as a USB cable * is attached and connected
to the computer, the preview screen of the night vision device shows a
blue screen and the text "USB". If the night vision device is successfully
connected to the computer, follow the instructions of the operating system
to access the data. This function is also available without a separate
power supply of the night vision device.
* not included in delivery
DE
GB
FR
ES
RU
IT
17