Troubleshooting - Philips SCD464 Instrucciones De Manejo

Troubleshooting

EN
Problem
No sound on parent unit. Volume off or too low.
No connection
between units.
Interference or poor
reception.
12
Possible cause
Units out of range.
Parent unit out of range of
tansmitted signal.
Units are set to different
channels.
Mobile or cordless phone(s)
too close to baby monitor.
Interference from other
baby monitors in the
neighborhood.
Battery power running low.
Transmitted signal is out of
range; e.g. there are too many
walls and/or ceilings between
baby unit and parent unit.
Parent unit located too close to
a window and picking up
interfering signals from other
appliances.
Solution
Turn VOLUME control (B-8) on
parent unit downwards.
Move parent unit closer to baby
unit.
Move parent unit closer
to baby unit.
Set channel selection switches
(A-8, B-7) to the same
position on both units.
Move phone(s) away from
baby monitor.
Switch both units to another
channel using the channel
selection switch (A-8, B-7).
Replace batteries.
Move parent unit closer
to baby unit.
Move parent unit away
from window.