Upgrading The Software - Samsung 650 Serie Manual De Usuario

Ocultar thumbs Ver también para 650 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Upgrading the Software

Samsung may offer upgrades for your TV's firmware in the future. Please contact the Samsung call center at
1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be
possible by connecting a USB drive to the USB port.
1
Insert a USB drive containing the firmware upgrade into the USB Upgrade Port
on the side of the TV.
Software can not be upgraded through the LAN connection.
2
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.

Press the ▲ or ▼ button to select SW Upgrade, then press the ENTER button.
4
The message Scanning for USB... It may take up to 0 seconds. is displayed.
5
If the firmware on the USB is properly recognized, the message Upgrade
version xxxx to version xxxx? The system would be reset after upgrade. is
displayed.
Press the ◄ or ► button to select OK, then press the ENTER button.
The upgrade starts.
Please be careful not to disconnect the power or remove the USB drive while
upgrades are being applied.
The TV will shut off and turn on automatically after completing the firmware
upgrade.
When software is upgraded, video and audio settings you have made will return
to their default (factory) settings. We recommend you write down your settings
so that you can easily reset them after the upgrade.
English - 6
TV side Panel
HDMI IN 4
USB Drive
Energy Saving
: Off
PIP
SW Upgrade
Software Upgrade
Scanning for USB.....
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX ? The
system would be reset after upgrade.
OK
Cancel

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Pl50a650t1fPl58a650t1fPl63a650t1f

Tabla de contenido