Anova TPB2507 Manual De Usuario página 65

1. INTRODUCTION
1. Loosen the 3 head screws.
2. Connect the cable to the body of the scissors using the indicated jack plug.
3. Place the scissors in the housing socket and take care to position the cable outlet in the
indicated position.
4. Incorrect cable position.
5. Retighten the housing screws.
6. Assemble the harness as shown.
7. Press the adjusting button on the pole and you can lengthen or retract the length as needed.
8. Complete assembly of the scissor set and its pole.
9. Turn on the machine, attach the scissor opening extension, and begin the task to be
performed.
IMPORTANT:
1. The scissors must be completely switched off before each maintenance or assembly.
2. Make sure all components are properly installed before using the scissors and turning it on.
Read the scissor instructions for any adjustments or maintenance.
2
- -