OZ Lifting Products OZ PREMIUM OZ200-CHOP Manual Del Operador página 10

Hand Chain Hoist Operation
Attaching the Load
1. If there are no twists in the chain proceed on to attach the lower hook to the load.
2. Do not use the chain to wrap around the load.
3. The load should be seated in the bowl of the hook and should not bear against the tip
of the hook or latch.
4. The hook latch should be tightly closed against the hook tip
5. Assure that the upper and lower hooks form a straight line and frame is able to swivel.
Lifting the Load
1. Pull chain clockwise.
Lowering the Load
1. Pull chain counterclockwise.
Overload Protection
Overload protection comes standard on all OZ Lifting hoists and is factory calibrated. The overload
protection is integral with the hoist and prevents the operator from overloading the hoist. When activated,
the overload will not allow hoist operation.
Activation of overload protection:
• While lifting- Load should be lowered
• While pulling- Load should be released
• Indicates that a larger capacity hoist should be selected, or the lifting specialist should be
consulted for another means of operation.
EN pg.10