Additional Safety Warnings; Product Description And Specifications; Intended Use - Arbortech PCH.FG.600.40 Manual De Instrucciones

surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5) SERVICE
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
⚠
ADDITIONAL SAFETY
WARNINGS
Wear hearing protection; Wear eye protection; Wear
dust mask; Wear protective gloves.

PRODUCT DESCRIPTION AND SPECIFICATIONS

Read instruction manual before using the tool
Read all safety warnings and all instructions, Failure
to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.

INTENDED USE

The machine is designed for the chiselling of wood. The
machine is designed and constructed for use with
attachments supplied by the manufacturer. The machine can
only be used for dry applications without use of water.
EC - DECLARATION OF CONFORMITY
Arbortech declares that the product PCH.FG.600.40 and
PCH.FG.600.60 described in this manual under "Technical
Specifications" are manufactured in compliance with
EN 60745 standardised documents. These products and
Technical File comply with the Directives 2006/42/EC,
2014/30/EU and 2011/65/EU.
The Technical File is located at: Arbortech PTY LTD,
67 Westchester Road, Malaga, WA, Australia, 6090
General Manager
Technical Specifications
Voltage
Power Rating
Frequency
Protection Class
Rated Speed
Mounting Thread Size
Weight
Vibration Emission (k=1.5)
Sound Pressure Level
Sound Power Level
⚠
WARNING: The declared vibration emission level
represents the main applications of the tool. However if the
230-240 V
710 W
50 Hz
II II
2 000 – 11 000 rpm
M14 mm
2.0 kg
4.4 m/s 2
L = 89 dB(A)
PA
k = 3
PA
L = 100 dB(A)
WA
K = 3
WA
a. Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property
damage or may cause an electric shock.
b. Release the ON/OFF switch and set it to the off position
when the power supply is interrupted e.g. in case of a
power failure or when the mains plug is pulled.
c. Do not touch chisels before they have cooled down. The
chisels can become very hot while working.
d. Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
tool is used for different applications, with different
accessories or insertion tools or is poorly maintained, the
vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period. Identify additional safety measures to
protect the operator from the effects of vibration.
ASSEMBLY
⚠
WARNING: To reduce the risk of serious personal injury,
turn the tool off and disconnect from the power source
before making any adjustments or removing/installing tools
or accessories. Use protective gloves when handling the
chisels to prevent cuts and bruises.
a. Inspect the Power Chisel to ensure that no damage has
occurred during shipping. If damaged, report to the
retailer immediately.
b. The Power Chisel is packaged with spare chisels and an
Oil bottle. Remove a chisel from the package, wipe off
the protective coating and insert into the Chisel Arm (2,7)
with the chisel bevel and the interlocking notch oriented
as shown in Fig. C. When the chisel is aligned and inserted
correctly, it will snap firmly into place.
c. To remove the chisel, first press the Chisel locking button
(3), then pull the chisel out of the arm as shown in Fig. C.
d. Use the oil bottle supplied to add 2 to 3 drops of oil in the
Oil Port (8) to lubricate the tool as shown in Fig. D.
e. Apply 2 to 3 drops of oil from the supplied oil bottle to
Oil Port (8) at 15-minute intervals of tool use, and before
each initial use.
OPERATION
⚠
WARNING: The chisel shaft becomes very hot during
prolonged use. Use protective gloves to handle chisels. Hold
the chisels away from the cutting edge.
a. The electric motor has been designed for the voltage
stated on the label. Always check the power supply
corresponds to the voltage marked on the motor.