Publicidad
FLOOR ROUGH-IN LAYOUT
Min.
9 1/2"
240
4 3/4"
120
*Water supply (hot and cold) only if needed for deck-mount faucet, needs to be prepared
after consulting with the faucet being installed. In most cases, 3/8" compression valves are
expected. The water supplies should also be raised 10-12" above the floor.
Fig. 1
Installation
1. Trace the bottom layout on the floor
2. Prepare in-floor 1 1/2" drain outlet with
wall/fixed obstructions
BACK
4 3/4"
120
H*
C*
FRONT
3
where the pedestal is to be placed
(As shown in Fig. 1)
a PVC pipe sticking 12" above the finished
floor. Add 1 1/4" p-trap adapter.
2 x screws to the floor
(not supplied)
Bottom of the pedestal
diam. 10" (255mm)
1 1/2" drain outlet raised
12" above the floor
LACAVA LLC
Publicidad
