Product Description - Oase HighLine Classic LED daylight 40 Instrucciones De Uso

PRODUCT DESCRIPTION

Overview
 A HighLine Classic LED Daylight 40/60/70/100/120
1 Operating instructions
2 LED lamp
3 ON/OFF switch
HighLine Classic LED Daylight is an LED lamp for OASE
HighLine aquariums. The light bar consists of an array
of LEDs. The angle of radiation of the LEDs ensures uni-
form illumination of the aquarium.
Intended use
Exclusively use the HighLine Classic LED Daylight
40/60/70/100/120 as follows:
• For illumination and facilitating biological processes
in aquariums.
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes in the
home (not for commercial use).
COMMISSIONING/START-UP
C A U T I O N
Strong LED radiation!
Possible consequences: Eye injury due to light flash.
• Never look into the light source.
Prerequisite:
• The lamp is disconnected from the power supply.
• The lamp is seated in the lamp holder and the lamp
holder is fitted onto the aquarium. (→ Operating in-
structions, HighLine Aquarium)
How to proceed:
 B
1. Insert the power plug into the socket.
– Ensure that the connection cable forms a drip
loop.
2. Switch on the lamp.
CLEANING
W A R N I N G
Possible death or severe injury from hazardous electri-
cal voltage!
• Prior to reaching into the water, isolate (switch off
and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power sup-
ply) before carrying out any work on it.
N O T E
Do not use any chemical cleaning agents as they are
harmful to plants, animals and the environment.
• If necessary, clean with clear water using a soft
brush.
• Do not use cleaning agents or chemical solutions.
We recommend using OASE PumpClean for remov-
ing calcium deposits.
N O T E
Recommendation on regular cleaning:
• Clean the unit as required but at least twice per
year.
DISPOSAL
N O T E
This unit contains electronic components - do not dis-
pose of this unit with domestic waste.
• Render the unit unusable by cutting off the cables.
• Dispose of the unit by using the return system pro-
vided for this purpose.
- EN -
7