Safety Information; Product Description - Oase biorb MCR LED Instrucciones De Uso

SAFETY INFORMATION

• Never operate the unit if the housing is defec-
tive!
• Never operate the unit if any electrical cables
are defective!
• Never carry or pull the unit by the electrical
cable.
• Route cables such that they are protected
from damage and do not present a tripping
hazard.
• Power connection cables cannot be replaced.
If the cable is damaged, the unit must be dis-
posed of.
• Do not look directly into the light source.
• Only connect the unit if the electrical data of
the unit and the power supply correspond.
The unit data is to be found on the unit type
plate, on the packaging or in this manual.
• Protect the plug connection from moisture.
Symbols used in these instructions
C A U T I O N
• Indicates a possibly hazardous situation.
• Non-observance may lead to slight or minor
injuries.
N O T E
Indicates information intended to give the user
a better understanding.
Additional information
 A Reference to a figure, e.g. Fig. A.

PRODUCT DESCRIPTION

Intended use
biOrb MCR LED, referred to in the following as
"unit", may only be used as specified in the fol-
lowing:
For lighting a biOrb CLASSIC, biOrb LIFE, biOrb
FLOW, biOrb TUBE aquarium.
• Operation under observance of the technical
data.
The following restrictions apply to the unit:
• Only intended for connection to a biOrb
transformer.
• Only use indoors and for aquaristic purposes
in the home (not for commercial use).
Function description
Individually adjustable lighting for the aquarium
biOrb; can be set by remote control (included in
the delivery scope).
Possibility for cyclical lighting:
- EN -
15