Cleaning And Maintenance - Grunkel CP-MAX6 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning and maintenance

The appliance still remains hot after use. Allow it to cool down completely before hand-
ling it for cleaning or storage.
The appliance must be unplugged from the electrical outlet before cleaning.
Never immerse the appliance into water or any other liquid. Do not put it under a water
stream. Do not put the appliance into the dishwasher.
Do not use aggressive cleaner products. Do not use metallic brushes or sharp tools to
clean the appliance.
When the ironing is finished, place the iron in vertical position and ensure that the sole-
plate has no water stains that could accumulate and block the steam holes.
Release the residual steam in the boiler after each use. Unplug the appliance from the
electrical outlet. Once the appliance has cooled down completely, turn the anti-calc val-
ve clockwise. Pour water into the boiler and turn the cleaning brush to clean the boiler.
Waggle the appliance softly and pour ot the water. Repeat this operation 2-3 times.
Once you are finished, insert the anti-calc valve back.
It is not mandatory to void the water tank after each ironing. However, it is recommen-
ded to carry our this action in order to avoid minerals to accumulate in the water depo-
sit, ducts and holes of the appliance that may affect its proper functioning.
Keep the soleplate clean always.
Recommendations
Separate the clothes according to the required ironing temperature. Start ironing the
clothes that require lower ironing temperature.
Some fabrics such as satin or wool, and accesories such as gloves, handbags, etc. will
keep a like new look pressing the steam and iron button.
Marks left on carpets by furniture can be removed by steaming and then brushing softly.
If the carpet is made of synthetic fabrics, a lower temperature will be suitable for the
ironing.
A considerable amount of continous steam is required to be applied on clothes to make
them flat.
To remove creases, it is recommended to moisten the affected zone with steam and
then proceed to dry ironing.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido