Changing The Battery; Restore Factory Settings - Abus SHRM10000 Manual De Instrucciones

Changing the battery

1.
2.
3.
4.

Restore factory settings

Remove the battery from the Smoke
detector device, press the Network button
and keep it pressed for 10 seconds.
Device will restore factory settings.
Turn the device anticlockwise and
remove it from the mounting bracket
and remove the old battery
Insert a new battery, ensure that the
polarity is correct.
Test the smoke alarm device. To do
so, press and release the test
button. The alarm will sound loud
short beeps indicating that the
smoke detector works normally.
Turn the detector clockwise onto the
mounting bracket
23