Connection Diagram - Pioneer GM-X574 Manual Del Usuario

Connecting the Unit

Connection Diagram

Speaker output terminal
See the "Connecting the
Speaker wires" section for
speaker connection instruc-
tions.
GM-X574: Fuse (25 A) × 2
GM-X374: Fuse (30 A) × 1
7
Fuse (30 A)
Fuse (30 A)
Grommet
Connecting wires with RCA pin
plugs (sold separately).
External Output
If only one input plug is used, do not
connect anything to RCA input jack B.
Front side
RCA output jack
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote control
terminal of the car stereo (SYSTEM REMOTE CONTROL). The female
terminal can be connected to the auto-antenna relay control terminal. If the
car stereo does not have a system remote control terminal, connect the
male terminal to the power terminal through the ignition switch.
Ground wire (Black) [RD-223] (sold separately)
Connect to metal body or chassis.
Special red battery wire [RD-223] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Speaker input terminal
See the "Using the Speaker Input"
section.
RCA input jack B
RCA input jack A
Connecting wires with RCA pin
plugs (sold separately).
Back side
Amplifier with
RCA input
RCA input jacks
Car stereo with
RCA output jacks