Toolland VL123 Manual Del Usuario página 5

5. Overview
Refer to the illustrations on page 2 of this manual.
1 rear handle
2 on-off switch
3 cord retainer
4 safeguard
5 power cord
6 front handle
Trimmer Head
11a cover
11b eyelet
11c latch
11d bumper
6. Assembly
Do not use a device that is only partly assembled or assembled with damaged parts.
Follow the assembly instructions step by step and use the pictures as guide.
Do not connect the device to the power supply before it is completely assembled.
6.1 Shaft
1. Align the shaft ends with each other and assemble the lower shaft into the upper shaft.
2. Secure the connection with the bolt.
6.2 Front Handle
1. Align and assemble the front handle onto the upper shaft.
2. Secure the connection with the bolt.
6.3 Guard
1. Align and place the guard onto the trimmer head.
2. Secure the connection with the screws.
V. 01 – 20/09/2016
WARNING
The device must be fully assembled before operation.
VL123
7 upper shaft
8 lower shaft
9 air vents
10 guard
11 trimmer head
11e trimming spool
11f trimming line
11g spring
11h housing
5 ©Velleman nv