GRAVEDA GRASPRESSO GP6003 Manual De Instrucciones página 32

Unit Overview and Operations
Before using the device, please check the machine's technical data. The right
voltage is 220-240V/50Hz (See the section "Technical characteristics of the
product").
Do not set the temperature above 232°C.The operating temperature is
between 0°C and 232°C. The temperature can be set to °C or °F.
Insert the power plug into the unit. Insert the power plug into the power
outlet. Switch the press on at the on/off switch. The control panel lights up.
P1 = temperature (set the desired temperature with the +/- key)
P2 = timer/time ( set the desired time with the +/- buton )
P3 = Celsius or Fahrenheit ( select C for Celsius )
P4 =Automatic shutdown function. Switching off the heating function of the
two heating plates after the set time (Note: The machine is still connected
and warms up again after pressing any of the butons)
1. Press the SET buton to access the temperature
setting of the two heating plates.
P1 is displayed on the control panel.
2. Now press the "up" or "down" buton to reach
the desired temperature. P1 is displayed on the
control panel.
3. Press the SET buton again to enter the time
setting mode.
You can now set how many seconds the timer
should count. The timer will beep after the set
time has expired. You can switch the timer off or
on again by pressing the Timer buton.
P2 is displayed on the control panel
Page 26