Safety Procedures And Cleaning Instructions - GRAVEDA GRASPRESSO GP6003 Manual De Instrucciones

Safety Procedures and Cleaning instructions

Page 27
Slowly increase the pressure with the cylinder. Important: Pressure results
may vary according to the user's temperature and pressure settings.
Carefully remove the pressed material with heat resistant gloves or tools.
Do not use baking paper as an interlayer or for pressing purposes! The
silicone coated on such paper can be removed in an easy way. This means
that this external element is not prepared to withstand very high pressure.
Do not place plastic sheets on the hot plates. Such layers can melt and
therefore damage the heating plates.
Only use suitable, approved and user-friendly paper layers that can withstand
the heat and pressure.
Make sure that the heating plates have completely cooled down before
cleaning them. Clean both plates regularly. Apply a small amount of alcohol
to a clean cloth and wash all components.
The use of at least isopropyl alcohol 80% by volume is the recommended
one by GRAVEDA®
The press must be cleaned with a damp cloth. Do not immerse the machine
or its parts in water. Do not use abrasive or aggressive cleaning products.
Only a damp cloth is required to clean the components.
It is advisable to use a clean and dry cloth in order to remove dust from the
unit in a frequent way.
Always switch off the machine when it is not in use!
Always unplug the power plug from the socket!