Before Assembly
A
B
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
4" Extension (1)
B
Left Side Frame Half (1)
C
Gate Door Panel (1)
D
Right Side Frame Half (1)
E
4" Extension (1)
F
Threaded Spindle Rods (4)
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that your
gate and extensions are properly installed. Improper installation
could result in the gate becoming unstable or dislodged from
the doorway. Always make sure the extension is securely
attached to the gate before using. The safety of your child is
your responsibility. Please keep these instructions for your
reference.
IMPORTANT
• Never use more than two extensions per side of gate.
• If hardware mounting to a surface other than drywall or wood,
please consult with a professional about installation.
• Base locks are to be used at all times, on both sides of the gate.
C
G
Wall Cups (4)
H
1" Wall Mount Screws (4)
Spring Loaded Upper Door
I
Mounting Pin (1)
J
Frame Assembly Screws (2)
K
Hex Key (1)
E
D
0310
0320
REMOVING YOUR GATE FROM THE WALL
To remove your gate from the wall, rotate the adjustment
wheels on each of the (4) threaded spindle rods to
depressurize the gate from its doorway or opening. Then,
gently pull or push the gate free from its doorway or opening.
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or
missing components. Do not use if any part is missing,
worn or damaged. Check the gate regularly to ensure all the
hardware and mountings are tightened. Do not use abrasive
cleaners or bleach. Clean by sponging with warm water and
a mild detergent.
F
I
J
G
I
H
K
30
42 in,
30
42 in,
English
l
30 in tal
37 in tall