Leotec L-PAD POLAR Manual De Usuario página 23

- USB just only be used for data transmission
The company reserves the right to improve product, products specification and design hav
eany change, The information is subject to changes without prior notice.
Note that this device uses an operating system license AndroidTM free of charge so there can be
substantial differences in the instructions in this manual regarding to those found in your device,
as well as differences in the language of the displayed options due to operating system upgrades.
Remark All pictures in this manual is just for your reference. products specification and design
have any change, The information is subject to changes without prior notice.
INTRODUCTION
First time use
Battery charge
Before using your LEOTEC L-Pad for the first time, fully charge the battery. Plug the adapter /
charger. Caution: Use ONLY the charger / adapter supplied with your device LEOTEC or a
compatible model with exactly the same specifications. The LEOTEC Tablet will turn on and
start charging. The battery icon in the main interface will indicate when the device is fully
charged. If not connected to a power adapter, the icon displays the percentage of available
battery.
Configuration
We recommend that the first time you use the L-Pad Tablet LEOTEC configure core values
such as language, location, date, time, security options and backup found in the Settings
section
23