LDLC Pano+ Manual De Usuario página 33

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
⚫
off the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern
⚫
you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of
⚫
0.01% or less such as a missing pixel or a pixel lit all of the time.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
⚫
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer
or service center for repair. Do not attempt to repair the monitor yourself.