Caution: Please don't cut off the power when you are upgrading the software.
6.6
Version
Via menu (MENU->setting-> Version) to check the software version.
Video output mode can change the mode of video output, you can adjust TV mode
according to the actual situation of you receiving equipment.
(2) Move the cursor to the corresponding option to be adjusted and press OK /
Right key to display the available settings, and then press UP/DOWN key to
move circularly and choose the desired option.
(3) Press OK key to save the settings.
7.1 Contrast
Contrast of the picture can be set from 0 to 24.
7.2 Brightness
Brightness of the picture can be set from 0 to 24.
7.3 Saturation
Saturation range of the picture can be set from 0 to 24.
7.4 Hue
Hue range of the picture can be set from -30 à +30.
AUDIO / VIDEO Setting
7
55