Troubleshooting - Nevir NVR-2503DSUGHD Manual De Instrucciones

The below table is a list of common problems that may occur with your receiver.
Fault
Power on, but nothing display on
screen
TV picture drops out and the unit
displays "No signal"
Receiving digital TV but missing
some channels
Remote is not working
In order to fulfill ruling UNE EN-60065, we indicate that if the flexible wire is damaged, it can
only be substituted by a technical service recognized by NEVIR, S.A., as per special tooling is
required.

10. TROUBLESHOOTING

Possible Cause
Unit not turned on at mains
switch
Antenna is not properly
connected or you are in a bad
reception area
Antenna is not properly
connected or you are in a bad
reception area
Batteries are flat or there is
interference
62
Solution
Ensure power plug is plugged
into wall socket and switch is on.
Talk to your local TV antenna
technician about reception
problems in your area and
whether a new antenna would
benefit you.
Talk to your local TV antenna
technician about reception
problems in your area and
whether a new antenna would
benefit you.
Try replacing batteries in the
remote and ensure that there is
no direct sunlight on the remote
or unit.