Power Management; Configuration Of The Power Limitation - Bertazzoni P784IC1G5NE Manual De Utilización

Power Management

The hob is equipped with a power limitation. If the power level on two zones exceeds the
maximum power, the last selected cooking zone will be maintained and the other cooking zone
will be automatically reduced. The display of this zone will flash first, then the level is
automatically reduced to the highest appropriate position. This limitation is set to 7400W from the
factory, but it's possible to change this limitation to the power limits 6800W, 6000W, 5400W,
4800W, 4600W, 3700W, 3000W, 2400W, 1900W.

Configuration of the power limitation

Procedure :
Carry out the configuration in less than 2 minutes after connection to the electrical network.
Do not press [ ].
1) Press the [
2) Each display shows a [
3) With one finger of the other hand press successively and quickly (in less than 2s) on
the [ ]. Starting from the front left area and turning counter-clockwise (1 -> 2 -> 3 -> 4)
then release the [
A double "beep" indicates an operating error. In this case, repeat the operation
from step 1.
4) Select the [ C/0 ] key in display "3".
5) Use the slider to make [ C/8 ] appear in display "3".
(This value in display "3" does not mean a power limitation)
6) Select the [ 0 ] key in display "4" and use the slider to enter the desired configuration in
the display :
- 0 corresponds to 7400W
- 1 corresponds to 6800W
- 2 corresponds to 6000W
- 3 corresponds to 5400W
- 4 corresponds to 4800W
- 5 corresponds to 4600W
- 6 corresponds to 3700W
- 7 corresponds to 3000W
- 8 corresponds to 2400W
- 9 corresponds to 1900W
7) Press the [
Never place container on the cooking zones during setup.
] key and hold it down.
].
] key.
] key to confirm the configuration.
13