Technical Specifications - Garbin 83P Manual De Instrucciones

1 - Introduction
eliminator properly.
(Warning: if the resin regeneration procedure is not perfect, it may cause
the appliance to rust).
• Before using the oven for the first time, it must be carefully cleaned:
- clean the outside using only a damp cloth;
- the inside of the cooking compartment must be cleaned with water;
- in any case, do not use steel wool scouring pads to clean the prover.
Failure to comply with these rules may compromise safety of both
the appliance and user.
Should either the user or technical personnel given the task of
installing the appliance fail to comply with the regulations contained
herein, the Manufacturer shall decline all responsibility, and any
accident or trouble as a result of said non-compliance shall not
be attributable to the Manufacturer.
Themanifacturer declines every responsability for possibilemistakes
contained in this booklet imputable to printing or transcription
errors.
It also reserves the right to bring changes to the product if
retained useful or necessary without jeopardizing the essential
characteristics.

1.3 Technical specifications

• The present appliance is designed exclusively for proving dough and is
intended for professional applications.
• Furthermore it is possible the application of a small motorman in all the
above mentioned versions.
The motor makes the heat even in the cabinet.
EN
13