Kobalt SGY-AIR135TZ Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
4. Rotate the bearing seat (C) and get the bearing
seat hole to face the ribbed side of the set
plate (D).
5. Push the set plate (D) forward to get the ribbed
side of the set plate (D) into the hole of bearing
seat (C). This ensuers the bearing seat (C) is
locked and stable.
6. Mount the sanding pad (B) onto the bearing
seat (C) by turning the pad clockwise with
hand. Make sure that the sanding pad (B) is
fixed tightly.
Only use sanding pads that have an RPM
rating equal to or greater than the tool itself.
WARNING
4
5
6
11
C
C
kobalttools.com
D
D