EUROM DryBest 10 Manual De Instrucciones página 20

If you set the air humidity with the "Lower" button to "Co", the appliance will
operate continuously.
4. Using the Timer button (B), you can set starting and stopping times for the
appliance. To do this, press the Timer button (B); lamp (2) will light up. If you
do this while the appliance is not in operation (but with the plug in the socket),
you will set the starting time; if you do this while the appliance is in operation,
you will set the stopping time. The number of hours set will appear on the
display. Each time you press the "Timer" button, an hour will be added (setting
from 1 to 24 hours). You can cancel the timer setting by setting the time to 0 (0
comes after 24). The time setting is "forgotten" when you switch the appliance
off manually, but is kept in memory if the appliance stops because the reservoir
is full or during the thawing process.
5. DryBest 20: Pressing the fan speed button changes the fan speed from high to
low and back. The lamp indicates the operational capacity.
6. DryBest 20: Pressing the clean dryer button will continually dehumidify the
appliance at a high fan speed.
7. Make sure that you then remove the plug from the socket after use.
Drainage
While the water tank is full, the compressor will stop for self-protection and the
water full indicator will turn on and A tone will sound 15 times to warn the user that
the reservoir needs emptying. To do this, press the sides of the reservoir lightly
with both hands, and pull it carefully and straight out of the appliance.
After empting the water tank, place the water tank into space.
Please note: in case, the water tank has not been positioned well, the water full
indicator keeps burning. The equipment does not work.
20