Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCCIONES DE USO
Installation and usage
Open both-sides of the support outward lightly, take out the sensor body.
Open the battery lid on the sensor, put 9v battery, on it and you could use it after 30s.
Switch function
ALARM: It will be 10s time delay if you turn "OFF" to "ALARM",that is, it will not alarm within
10s even if there is detection signal and it will alarm quickly when you trigger it after 10s.
OFF: The sensor doesn't work.
CHIME: It will be 10s time delay if you turn "OFF" to "CHIME", if you trigger it after 10s it will
be 2~3 times "dingdong" sound and will stop automatically.
Note
Please don't hit the sensor and detection windows with hard or rough object;
Please don't install the sensor in the sunlight, raining and high humidity zone;
Please don't install the sensor near heat or air current changed zone;
Please take out the battery in order to avoid damaging the sensor if you don't use it for long
time.
LX-AL-01 is not formal alarm and it has limited alarm loudness, so it can call attention
to you only, but can't guarantee absolute safety. We don't undertake any
responsibility if happen any unexpected event.
Attention
Antes de introduzir a bateria, coloque o interruptor na posição OFF.
ALARMA CON SENSOR DE MOVIMIENTO
9
Publicidad
