Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Chrysler 200 LX
Jeep Cherokee Sport 2014-up
Ram Trucks
KIT FEATURES
• Double DIN radio provision
• Painted matte black
• Note: Modifications to factory radio cavity
is required for this installation
KIT COMPONENTS
• A) Radio housing • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55
METRA. The World's best kits.
Installation instructions for part 95-6518b
APPLICATIONS
2015-up
(with a 3.0" screen)
(without 8.4 inch touchscreen)
95-6518B
metraonline.com
™
2013-up
Table of Contents
Dash Disassembly
– Chrysler 200 LX
(with a 3.0" screen)
– Jeep Cherokee Sport 2014-up ..........................3-4
– Ram Trucks 2013-up............................................ 5
Kit Assembly
– Double DIN radio provision ................................... 6
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32 Socket removal tool
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
2015-up ......... 2
Publicidad
Manuales relacionados para Metra 95-6518B
Resumen de contenidos para Metra 95-6518B
- Página 1 • Panel removal tool • Phillips screwdriver • 9/32 Socket removal tool CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate controls panels, and especially air bag indicator lights must be con - nected before reconnecting the battery or cycling the ignition.
- Página 2 95-6518B Dash Disassembly Chrysler 200 LX 2015-up (with a 3.0” screen) 1. Unclip the radio trim bezel from the vehicle. (Figure A) 2. Remove (4) screws securing the radio to the dash, disconnect the connectors attached, and then remove the radio.
- Página 3 95-6518B Dash Disassembly Jeep Cherokee Sport 2014-up 1. Unclip and remove the climate control panel from 4. Remove (4) screws securing the radio to the the vehicle and put to the side. (Figure A) dash, disconnect the connectors attached, and then remove the radio.
- Página 4 95-6518B Dash Disassembly Jeep Cherokee Sport 2014-up (Continued) Sub-dash modification: 1. Remove the rubber cover from inside the pocket on top of the Remove screws Remove sub-dash dash, and then remove (1) screw bracket exposed. 2. Remove (2) screws below the radio cavity.
- Página 5 95-6518B Dash Disassembly 2013-up (without a 8.4 inch touchscreen) 1. Remove liner inside tray at the top center of the dash and remove (2) torx screws. (Figure 2. Unsnap and remove radio panel. (Figure B) 3. Remove four screws and remove radio.
- Página 6 (Figure C) (Figure A) (Figure B) (Figure C) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Reassemble the dash in reverse order of disassembly.
- Página 7 95-6518B Notes...
- Página 8 Installation instructions for part 95-6518b IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 9 Instrucciones de instalación para la pieza 95-6518b APLICACIONES Indice Chrysler 200 LX 2015 y mas (con una pantalla de 3.0”) Jeep Cherokee Sport 2014 y mas Desmontaje del tablero Ram Trucks 2013 y mas – Chrysler 200 LX 2015 y mas . 2 (con una pantalla de 3.0”)
- Página 10 95-6518B Desmontaje del tablero Chrysler 200 LX 2015 y mas (con una pantalla de 3.0”) 1. Desenganche el bisel de la moldura del radio del vehículo. (Figura A) 2. Retire los (4) tornillos que sujetan el radio a tablero, desconecte los conectores unidos y luego quite el radio.
- Página 11 95-6518B Desmontaje del tablero Jeep Cherokee Sport 2014 y mas 1. Desenganche y quite el panel del control del 4. Retire los (4) tornillos que sujetan el radio a tablero, desconecte los conectores unidos y luego clima del vehículo y póngalo a un lado. (Figura A) quite el radio.
- Página 12 95-6518B Desmontaje del tablero Jeep Cherokee Sport 2014 y mas (Continúa) Modificación al sub tablero: 1. Quite la cubierta de goma de la parte interior de la cavidad arriba Quite los tornillos Quite el soporte del del tablero, luego retire (1) tornillo sub tablero que queda expuesto.
- Página 13 95-6518B Desmontaje del tablero 2013 y mas (sin pantalla táctil de 8.4 pulgadas) 1. Quite el forro interior de la charola en la parte superior central del tablero y quite los (2) tornillos torx. (Figura A) 2. Suelte a presión y quite el panel del radio.
- Página 14 (Figura C) el radio. (Figura C) 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 4. Vuelva a armar el tablero al revés...
- Página 15 95-6518B Notas...
- Página 16 Instrucciones de instalación para la pieza 95-6518b IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...